Mycelial plate towers Diameters ranges from 4.58 m to as much as 32 m, with a volume of up to 24,687 m3.
High-grade galvanised finish for raw material 600g/m2 ensures longevity and an advantage over towers from other manufacturers.
Durable truss frame, used in roof construction with a 30-degree slope. Custom roof constructions for increased load-bearing capacity are also possible.
High-tensile bolts EN DIN 933 grade 10.9 with Dacromet 500 coating and HDPE nuts for sealing quality
Towers Internal stairs developed for easy tower servicing and control within them. Mysilo offers circular roof ladder as steps, available as optional equipment, if additional access and security are required.
Each tower has two entrance doors. The first provides access to the tower from the roof when it is full, and the second is located on the second level of the tower from the bottom, for access when the tower is empty.
Safety grille, which covers ventilation outlets, protects against bird entry. Ventilation outlet The quantity depends on the diameter of the tower and the type of grain intended to be stored in the tower.
Towers can be fitted with 3 types of ventilation systems:
Shaft-type channel ventilation (ventilation channels are built into the concrete floor of the tower, covered with a perforated metal profiled sheet metal covering)
Available in a wide range of diameters from 4.58 – 11 m, with volumes up to 1829 m³. The standard cone slope is 45 degrees, but four different cone slope variations are available – 37, 40, 45, and 60 degrees. The cone slope varies depending on the cone diameter, application type, and product to ensure comfortable flow. Thanks to their high capacity and specially designed robust cone structure, the towers effectively handle loads. All tower parts are designed for maximum grain storage safety.
High-grade galvanised finish for raw material 600g/m2 ensures longevity and an advantage over towers from other manufacturers.
Durable truss frame, used in roof construction with a 30-degree slope. Custom roof constructions for increased load-bearing capacity are also possible.
High-tensile bolts EN DIN 933 grade 10.9 with Dacromet 500 coating and HDPE nuts for sealing quality
Tower access door And two for each tower. The first provide access to the tower from the roof when it is filled; the second are located on the second level from the bottom, for access when the tower is empty. Thanks to the internal covering of the lower door, the lowest access door ensures that the door cannot be opened when the tower is filled.
Safety grille, which covers ventilation outlets, protects against bird entry. Ventilation outlet The quantity depends on the diameter of the tower and the type of grain intended to be stored in the tower.
Excellent for installation in existing buildings, saving space compared to round cone towers. They are available in various sizes.
The wall bunkress eases cleaning and is also ideal for storing specific products that might stick to standard towers with side profiled walls.
This allows you to quickly install them in a new or existing grain storage building or complex. The various silo elements, made from high-quality galvanised steel, are easily interchangeable and allow for the effective creation of a solution precisely suited to your needs and location.
Bunkers are assembled using bolted connections. The vertical leg system perfectly bears all bunker loads evenly. After sealing the walls with suitable sealants, bunker wall elements can be used as exterior walls. Conical bottom bunkers are available with 150-250 mm discharge cones.
Square tanks can be equipped with a ventilation system, access hatches, ladders, covering roofs, supporting legs or load-bearing support structures, as well as being raised on a high frame so that they can be used as a tower for gravity discharge onto road transport.
Beds are easy to install and modify.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Latvian Latvian 
English
Estonian
